Vehicle transport semi-trailer
The vehicle transport semi-trailer is a semi-trailer with a fence structure design for the cargo area. It mainly carries cars, but also passenger cars such as vans, commercial vehicles, and jeeps. 1. The body is a rod and cabinet structure, with light structure and light weight. Most of them are two-layer loading platforms. 2. Light structure: The whole vehicle adopts a truss structure, and the frame carries the overall load without the longitudinal beam structure of a semi-trailer. The self-weight is light, which is about 30% lighter than that of similar vehicles. 3. Safe and convenient operation: all loading and unloading platform lifting controls are reliable in operation, can be clearly observed and operated accurately. 4. Suspension system: It adopts the unique suspension system under the leaf spring, and the variable-section leaf spring has good driving comfort.
Powder material transportation semi-trailer
The powder material transport semi-trailer is a special vehicle for the transportation of large quantities of dust material (bulk cement). It is generally suitable for areas where weight-based charges are strictly followed in accordance with national regulations. The volume is generally between 35-45 cubic meters. It is suitable for the transportation and pneumatic unloading of dry materials such as fly ash, cement, lime powder, ore powder, etc., whose particle diameter is not greater than 0.1mm. When the vertical height of unloading reaches 15m, the horizontal conveying distance can reach 5m. The semi-hanging powder material transport vehicle uses the power of its own engine to drive the on-board air compressor through the power take-off, and sends the compressed air into the air chamber at the lower part of the sealed tank through the pipeline, so that the cement on the fluidized bed is suspended into a fluid state , when the pressure in the tank reaches the rated value, the discharge butterfly valve is opened, and the fluidized cement flows through the pipeline to be transported. Made with domestic advanced technology, it is novel in design, strong and durable. The air bag type has a large carrying capacity, and the unloading speed is fast and the residual volume is small. The integrated tank has the characteristics of high overall strength, good rigidity, good pressure bearing and good performance. The fluidized bed in the tank has a scientific design and reasonable layout, which can effectively shorten the unloading time, reaching 1.4T/min, improving the volume utilization rate of the tank, and reducing the remaining ash rate, which is 0.2%. The tank body of the powder material transport vehicle adopts a double-cone inward-inclining horizontal structure, double-pipe air intake, double-tube feeding, and its unloading speed and residual rate meet the requirements of the industry standard.
Post time: Dec-28-2022